Product Details:
Payment & Shipping Terms:
|
Features: | Our Ca Zn Stabilizer CZ-202, Used Together With 702E6 Will Get Better Effect. The End Product Can Reach SGS ROHS Compliance | Application Of WS-E6: | PVC Water Supply Pipes, Fittings, Corrugated Pipes And Etc |
---|---|---|---|
Recommended Dosage (phr.) (PVC 100phr.) Of WS-E7: | 2.0-2.5 | Advantage: | Increase The Physical And Chemical Index, Get Bright Surface, Increase VEKA Intensity, Reduce 7-12% Production Cost. |
High Light: | pvc modifier,impact modifier for pvc |
Acrylic Impact Modifier , Impact Modifier , High Efficiency PVC modifier WS-E6 for PVC fitting
Product features of Acrylic Impact Modifier WS-E6
Use our efficient modifier WS-702E6 to replace ACR and soybean oil (or plasticizer) can improve the quality of pvc products and reduce the production cost.
Use 2-2.5 phr of efficient modifier WS-702E6 to replace 1.5-2 phr of ACR and 2-3 phr of soybean oil (or plasticizer), can reach or exceed the original product quality, increase the physical and chemical index, get bright surface, increase VEKA intensity, reduce 7-12% production cost.
Our Ca Zn stabilizer CZ-202, used together with 702E6 will get better effect. The end product can reach SGS ROHS compliance.
Specifications of High Efficiency PVC Modifier WS-E6
Chemical composition | Acrylic PVC modified graft polymer |
Appearance | White or slightly yellowish crystalline powder |
Heating loss, % | 1.2 max |
Apparent density, g/cm² | 1.17-1.39 |
Heavy metals, ppm | 10 max |
Reference formula
Water supply fitting | Drainage fitting | |||
PVC | 100 | PVC | 100 | |
Precipitated CaCO3 | 12-20 | Precipitated CaCO3 | 25-35 | |
Ca Zn stabilizer CZ-202B |
4-4.5 |
Ca Zn stabilizer CZ-202B |
4.2-4.8 | |
Efficient modifier WS-702E6 |
2-2.5 |
Efficient modifier WS-702E6 |
2-2.5 | |
Titanium dioxide pigment |
Appropriate dosage |
Titanium dioxide pigment |
Appropriate dosage | |
Stearic acid | 0.1-0.3 | Stearic acid | 0.2-0.4 | |
PE wax | 0.2-0.3 | PE wax | 0.2-0.3 |
Suggestion in High Efficiency PVC Modifier WS-E6 use:
The manufacturer must increase or decrease 702E6 dosage according to the filler ratio in formula, keep 702E6 dosage within 2-2.5 and adjust lubricant dosage to achieve the best plasticizing effect.
Strictly control the technological conditions, pay attention to the back pressure, balance the lubricant dosage, prevent the products from bubble, black spot, gray spot and so on. When using calcium zinc stabilizer, the temperature of mixed material is around 118 centigrade, non-standard injection should be moderate increase dosage of lubricant.
Packing and transportation of High Efficiency PVC Modifier WS-E6:
The products should be stored in dry and cool place with air ventilation, and pay attention to moisture proof.
The products packed in plastic woven bag lined with PE bag, 25kg net weight per bag.